Friday, September 17, 2010
A quick fix for the Galley.
I needed a convenient space for spices, etc. So, I added a removable (slides on over two bolt heads in the wood) spice speed rack. I kept this old shelf for almost 20 years, moving it from home to home, to storage shed. Now, it lives again. The top shot is the "After" and the bottom, "Before."
Friday, September 10, 2010
AT LAST! ANOTHER CRUISING PROJECT FINISHED.
The hanging locker is, to my thinking, a waste of space. I need shelving for clothes. So, I converted the hanging locker to a shelving (installed on a 25 degree angle to prevent falling).
This is where I started:
The next step was to install supports for the shelves.
Then, fit and paint new shelves white (eaiser to see what's there):
This is where I started:
The next step was to install supports for the shelves.
Then, fit and paint new shelves white (eaiser to see what's there):
Thursday, February 18, 2010
Extended Absence
Sometimes you just can't get to the job at hand. I tore my rotator cuff sailing on the 4th of July 2009. But, that was just the straw that broke the camels back. The shoulder was already giving me pain
. So, what followed was a course of med's, then physical therapy, more x-rays, MRI, etc. Then, after waiting at least 30-45 days to get another appointment following each procedure treatment, the decision was to do surgery. But, the holidays were a scheduling problem for the physicians, so surgery ended up in the new year, 2010, January 18. Now it is done. Ligaments reattached, the joint parts ground down and resurfaced, and the rotator cuff stitched up. They thought I should go to a rehab facility for 8 weeks following surgery. I did not.
After one night in the hospital, a friend picked me up and brought me back across the bay and helped me get onto my boat. If it had been a normal Florida winter it would have been a piece of cake; but, the temp dropped to just above freezing every night for a week (and I had no heat), and it has stayed reasonably cold. I must admit I have spent more comfortable nights, as I sat trying to sleep wrapped in a sleeping bag leaning against the bulkhead. The visiting nurse, who came every day, had never made a patient visit on a boat. After learning to check the tide level, she loved her 2 weeks of visits.
It has been a month now, and I still can't get off the boat at low tide. My comings and goings are determined by the tides because at low tide I am 3.5 ft below the dock. And, since we are prohibited from installing ladders, if I miss the tide window I am stuck on the boat until the next day.
The good news, I only have another 4 weeks to live with this straight jacket restraint! Then I start PT and hopefully get back to work on the boat.
After one night in the hospital, a friend picked me up and brought me back across the bay and helped me get onto my boat. If it had been a normal Florida winter it would have been a piece of cake; but, the temp dropped to just above freezing every night for a week (and I had no heat), and it has stayed reasonably cold. I must admit I have spent more comfortable nights, as I sat trying to sleep wrapped in a sleeping bag leaning against the bulkhead. The visiting nurse, who came every day, had never made a patient visit on a boat. After learning to check the tide level, she loved her 2 weeks of visits.
It has been a month now, and I still can't get off the boat at low tide. My comings and goings are determined by the tides because at low tide I am 3.5 ft below the dock. And, since we are prohibited from installing ladders, if I miss the tide window I am stuck on the boat until the next day.
The good news, I only have another 4 weeks to live with this straight jacket restraint! Then I start PT and hopefully get back to work on the boat.
Monday, November 2, 2009
Small Project - HINGE COVER FOR UNDER SETTEE STORAGE
The obvious cure was to access the area via the seat board which was fastened into place with 27 screws. So, I removed the screws and cut the board to make a swing up cover. Maybe it took 27 screws to eliminate rattles but it seemed excessive as I extracted each with a manual screw driver.
After cutting, I filed the edges and corners down on the brass hinges (they had sharp corners that could have cut through the bedding used on the settee), and set them in place. Then I added a finger hole to lift the board.
The unfinished finish work, is to add a brass hook and eye to hold the board up for easy access to the storage area and some padding around the finger hole.
Wednesday, October 21, 2009
Tuesday, October 20, 2009
Mutiny on Soul Mate
Well, I guess my crew, Seaman FuzzyFace, decided that it was just too boring to remain on, Soul Mate. He jumped ship yesterday, via a leap from the V-berth, through the forward hatch. That hatch had been closed and filled from the inside with a custom fitted slab of R-8 insulation all summer. Since we were enjoying our first "nice" day of Fall, with temp's finally under 90 degrees, now a sudden drop to the high 60's, I removed the insulation and opened the hatch about 4 inches before leaving for Home Depot to buy materials to fit the new sliding screen/shade fixture to be installed inside the hatch. Needless to say I didn't discover until several hours later, he was gone. Of course, I ended up walking the docks shaking a bottle of "Cat Candy" for several hours, to no avail. And, I sat up till 3 AM, in the cockpit, periodically shaking the "Cat Candy." I finally hit the rack at three, leaving the forward and companionway hatches open. This morning, no FuzzyFace. I hope he leaped to the finger dock on his way to a great adventure, and did not decide to plunge off the deck and catch one of the big fish that lurk in the 15 foot water about the boat. Gee, I miss the silly cat.
Subscribe to:
Posts (Atom)
